公司介绍

广州市金茂通汽车用品厂是一家专业生产8K镜光进口不锈钢轮眉、门槛条、车窗饰条、油箱盖饰件、后护板、后饰条、转向灯饰以及生产晴雨挡、挡泥板的厂家，为各款车型配套，全部用模具成型生产，尺寸准确、优质、优胜于任何手工产品。本厂以“品质至上，价格合理”为宗旨。本厂有生产五金模具、塑料模具十多年经验，一直从事新产品开发，起货快，质量好，欢迎广大客户前来洽谈订货或来样订做。

Guangzhou Jin Mao Tong Automobile Products Factory is engaging in the production of stainless steel

Automobile Products. All products are moded and with precise dimensions, which is superior to any man-

made products. The principle of our factory is to offer top quality products and charge reasonable price.

We have been in this industry for more than 10 years and kept Developing new products. You are most

welcome to drop by and talk with us to get quality products with quick

产品优势

品质卓越，值得信赖！安装非常简单，方便。精选优质不锈钢，模具制造，可有效保护您爱车易磨损部位。

产品特点
1、不锈钢材质制成的后护板，精致华丽，不会生锈，令您的爱车更有立体感、更抢眼！
2、精选优质不锈钢材料，模具制造，外表光洁亮丽，安装简单，能够起到一定得防撞防蹭功能，同时也是一种装饰性的元素。
3、上面铸有车型标致，与汽车本身完全配套。
4、后护板不仅能保护您的爱车不受损伤，而且精致、华丽的外表尽显您爱车独特魅力，是车友必选的基本饰品。

 The remarkable quality, is worth trusting! The installment is simple, convenient. Selects the high quality stainless steel, the die making, but protects you to love the vehicle easy wearing terrain effectively.

product characteristic

1, the stainless steel material quality makes after guard shield, fine magnificent, will not rust, makes your love vehicle to have the stereoscopic effect, to be more outstanding!

2, selection high quality stainless steel material, die making, semblance bright and clean sharp, the installment is simple, can get up is certain anti-collision against rubs the function, simultaneously is also one kind of cosmetic element.

3, above cast have the vehicle type to be beautiful, forms a complete set completely with the automobile itself.after

4, the guard shield not can only protect your love vehicle not to receive damages, moreover fine, magnificent semblance completely obviously you love the vehicle unique charm, is basic accessories which Che Youbi elects.

安装方法：

1.表面清洁.粘贴表面须保持绝对清洁干燥,一般清洁可用无纤维脱落的布蘸以50%的酒精,异丙醇,丙酮或甲苯溶液加以擦洗,经溶剂清洁的表面须待溶剂彻底发挥后方可粘贴.

2.产品粘贴,产品粘贴前须将产品放在所需安装的部位调整好,确定产品安装的位置后,再撕下红膜进行粘贴.操作时应避免手指与胶面的接触,产品粘贴后须用力压,以保证胶面的充分接触和润湿.

3.产品与零件粘贴后需24小时内不接触水和较大的灰尘方可达到最佳的粘结力.

Installs the method:

1. surface is clean. The glue surface must maintain the thoroughly clean is dry, generally clean available the cloth which falls off without the textile fiber dips by 50% ethyl alcohols, the isopropyl alcohol, the acetone or the toluene solution scours, must treat the resolver thorough display after the resolver clean surface only then glues.

2. product glue, before the product glue, must place the product the spot which must install to adjust, after definite product installment position, then tears down the red membrane to carry on the glue. When operation should avoid the finger and the rubber surface contact, after the product glue, must use the forcing, guarantees the rubber surface the full contact and moist.after

 3. product and components glue, needs in 24 hours not to contact Shui Hejiao the big dust only then to achieve the best cementing power.